Air Traffic Control

VCCS

 

VCCS is designed for the equipment of grand automatic command system like ATC, C4I and etc. Now it has 12 serial products.

The whole system is based on IP technology and integrated functions of Video Monitoring, Video Meeting, and Voice Communication. The system is mostly combined with Media Unit, Voice Communication Unit and Terminal of System Management.

 


MLAT

 

The MLAT-01 series multi-base station measure ment and positioning system utilizes the time difference of arrival of the received signals of the base station, enabling accurate, reliable, and accurate targeting of aircraft, scene vehicles or other targets capable of transmitting mode A/C/S signals in the air or on the ground. Real-time positioning and screening. At the same time, the system can also accept and process the standard format ADS-B signal and form the ADS-B monitoring target, as a redundant means of multi-base station measurement location monitoring and independent output, airport scene, terminal area, wide area.

 


SSR

The DLD-100C S mode air-tube secondary radar adopts an all-solid-state single pulse system with an enhanced S-mode function. It can detect aircraft with an organic transponder within 256 nautical miles in real time, providing the targets distance, bearing, and altitude. Identify information such as codes and other special signs.

The radar can be used in air traffic control systems for route and terminal area surveillance, providing continuous and accurate air traffic control information to the air traffic control department.

 

Key Feature

1. enhanced S mode function

2. transmitter technology for all solid state power amplification chains

3. Lightweight, high gain, large vertical aperture antenna

4. High sensitivity, large dynamic digital IF receiver and signal processor

5. Complete BITE function

6. Advanced signal processing and data processing algorithms

7. Flexible parameter setting function

8. Suitable for variety of data transmission methods

9. High reliability, High maintainability system design technology

10. Unattended and low maintenance costs


(SPGA-200T)

 

The SPGA-200T Transmitter is a UHF band of radio transmission equipment for setting up modern ATC or ground to air radio communications systems. Its transmission type is Double Side Band Amplitude Modulation, A3E for speech. Field-provenTransce1vers of the SPGA-200 Series provide the basis for reliable rad1ocommunicat1ons 1n a number of countries over the Africa and Latin America

 


(SPGA-200R)

The SPGA-200R Receiver is a UHF band of radio reception equipment for setting up modern ATC or ground to air rad1ocommunications systems. Its reception type is Double Side Band Amplitude Modulation, A3E for speech.Field-provenTransce1vers of the SPGA-200 Series provide the basis for reliable rad1ocommunications in a number of countries over the Africa and Latin America.


(SPMT-1000)

 

SPMT-1000 VHF ground-to-air communication radio is a transreceiver. It works at 108MHz  to 136.975MHz , and it adopts amplitude modulation. It provides voice communication capability, and it supports remote control and monitoring

Tel :( 8610 ) 82209471 Fax :( 8610 ) 82209100 Copyright © 2003-2015 CETC International Co.,Ltd. All Rights Reserved   360網站安全檢測平臺
午夜偷拍精品用户偷拍免费_午夜福利不卡片在线播放免费_午夜欧美不卡在线观看视频